These are a little harder but its basically the same process
note: it won't be beneficial to unscrew the whole roof unit from the screws inside the flip down sunglass holder, because there are screws behind the map lights holding up the unit
Put the screw driver behind these four points and pry the case off It will be a little harder to pull these out because the pins also have hooks on them just play around with it a little and it will come loose
you will want to take off the other case at this time as it will be easier by prying from here: pull out the bulbs and replace with LEDs, if LEDs don't turn on, flip them around WARNING: THESE BULBS GET HOT, so before you change it out to the LED, let it sit and cool for a couple minutes if you had it on
replace the covers by pushing them back in and just letting the pins pop back into place
